Quick Response Fire Sprinkler Heads by Viking
Standard Response Fire Sprinklers
Residential Fire Sprinklers
Institutional Fire Sprinklers
Quick response fire sprinkler heads manufactured by
Viking Group Inc. Viking quick response fire sprinklers are direct replacements for any other brand quick response fire sprinkler heads. If you do not see the Viking fire sprinkler
parts below that you need, please call us and we will get them for you.
Please click here for things you should know before ordering fire sprinklers.
ALSO AVAILABLE: CONVENTIONAL, HORIZONTAL SIDEWALL, VERTICAL SIDEWALL
CHROME, WHITE-POLYESTER, BLACK-POLYESTER, BLACK-TEFLON, WAX COATED, POLYESTER & WAX, DOMED CONCEALED, HORIZONTAL FLUSH, CONCEALED PENDANT
SIZES 1/2" AND 3/4" K FACTORS AVAILABLE in 2.8, 4.2, 5.6, 8.0
If you have any questions about any kind of quick response fire sprinkler
replacement parts, please call us at the number below or e-mail us for same day price quotes. Call for discounts on large orders.
Please call us at 706-283-8459 or FAX us at 706-283-0757. You may also contact us via e-mail at firstname.lastname@example.org.
A $10 processing fee will be added to orders of less than $100
Hawaii & Alaska Customers Will Be Contacted For Shipping Charges.
Back To Index
Click here to get help with Sprinkler Head Guards and Escutcheons
Viking Upright Fire Sprinkler Heads and Conventional Pendent Fire Sprinklers are small, thermosensitive, glass-bulb spray sprinklers available in several
different finishes, temperature ratings, and K-Factors to meet design requirements. The special Polyester and Teflon coatings can be used in decorative applications where colors are
desired. In addition, these coatings have been investigated for installation in corrosive atmospheres and are cULus listed as corrosion resistant as indicated in the Approval Chart.
(Note: FM Global has no approval classification for Teflon® and Polyester coatings as corrosion resistant.) Viking standard response sprinklers may be ordered and/or used as
open sprinklers (glass bulb and pip cap assembly removed) on deluge systems.
LISTINGS AND APPROVALSROVALS
UL Listed: Category VNIV
FM Approved: Classes 2001, 2002, and
NYC Approved: MEA 89-92-E, Volumes 3 and 12
ABS Certified: Certificate 04-HS407984B-PDA
VdS Approved: Certificate G4060055, G4980001, G4980003, G4980004, G4980006, and
LPC Approved: Ref. No. 096e/06
CECE Certified: Standard EN 12259-1, EC-certificate of conformity 0832-CPD-2001, 0832-CPD-2003, 0786-CPD-40137, 0786-CPD-40142,
0786-CPD-40177, and 0786-CPD-40182
MED Certified: Standard EN 12259-1, EC-certificate of conformity 0832-MED-1003 and 0832-MED-1008
: Other International approval
certificates are available upon request.
Refer to the Approval Charts on pages 11t and 11u and Design Criteria on page 11v for cULus and FM approval requirements that must be
Available since 1997.
Minimum Operating Pressure: 7 psi (0.5 bar)*
Maximum Working Pressure: Sprinklers VK021 and VK124 are rated for use with
water working pressures ranging from the minimum 7 psi (0.5 bar) up to 250 psi (17 bar) for high-pressure systems. High-pressure
(HP) sprinklers can be identified by locating "250"
stamped on the deflector. All other Part Nos. not mentioned above are rated to a maximum 175 psi (12 bar) wwp.
Factory tested hydrostatically to 500 psi (34.5 bar)
Patent No. 4,831,870
Thread size: Refer to the Approval Charts
Nominal K-Factor: Refer to the Approval Charts
Glass-bulb fluid temperature rated to -65 °F (-55 °C)
Length: Refer to the Approval Charts
*cULus Listing, FM Approval, and NFPA 13 installs require a minimum of 7 psi (0.5 bar). The minimum operating pressure for LPCB and CE Approvals
ONLY is 5 psi (0.35 bar).