|
Rack and Reel Fire Hose
is fully lined and FM Labeled. Has an acceptance test pressure of 500 PSI and a service test of 250 PSI. Each section comes already folded for ease of
installation on pin racks. NOTE: This inexpensive lightweight hose is designed for use as emergency fire hose only! It should never be used for wash down or any other purpose. U
.L. Labeled rack and reel fire hose is available for an additional fee.
Single Jacket Fire Hose
has a burst pressure of 750 PSI, an acceptance test pressure of 500 PSI, a service test of 250 PSI and is FM Labeled. Made of 100% polyester, rubber
lined material for strength and flexibility. Recommended for industrial fire protection.
U.L. Labeled Single Jacket Fire Hose
has a burst pressure of 750 PSI, an acceptance test pressure of 500 PSI and a service test of 250 PSI. Made of 100% polyester, rubber
lined material for strength and flexibility. Recommended for industrial fire protection.
Double Jacket Fire Hose has a burst pressure of 1200 PSI, an acceptance test pressure
of 800 PSI, a service test of 400 PSI, meets NFPA 1962 and is FM Labeled. Made of 100% polyester, rubber lined material for strength and flexibility. Recommended for industrial fire protection.
Yellow Polymer Impregnated Fire Hose
has the same specifications as our standard double jacket hose except that the outside jacket is independently and completely impregnated with abrasion resistant, water repellent polymer. Available in aluminum
couplings only.
Rubber Covered Fire Hose has a burst pressure of 800 PSI, an acceptance test
pressure of 500 PSI, a service test of 250 PSI and is FM Labeled. Abrasion and heat resistant nitrite synthetic one-piece cover and liner. Impervious to water, oil, gas and
most chemicals. Lightweight and virtually kink resistant for ease of handling. No drying required! Tested to and coupled to NFPA 1961 standard and comes FM Labeled. Available in aluminum couplings only.
Polycarbonate Nozzles
   
Our high impact Polycarbonate Nozzles
are ideal for use with pin racks and single jacket hose, especially in areas where brass nozzles are likely to be stolen. Buy on-line here.
Industrial Brass Nozzles
 
Industrial Brass Fog Nozzles that are precision machined with a satin brass finish. They
are U.L. Listed for non-electrical fires. The 1 1/2" and 2 1/2" size are also FM Approved. Buy on-line here.
Industrial Brass Fog Only Nozzle
that is precision machined with a satin brass finish. From shut-off to 30° thru 90° fog. U.L. Listed for Class A, B and C (electrical) fires. Buy
on-line here.
Rack Brass Adjustable Fog Nozzles (shut off, straight stream, fog) that are precision
machined with a satin brass finish. U.L. Listed and FM Approved for non-electrical fires. Buy on-line here.
Cast brass 1 1/2" Straight Stream Nozzle with satin finish. This nozzle is very popular for
industrial washdown applications. Remember to only sell double jacket fire hose for washdown. Buy on-line here.
U.L. Listed and FM Approved Playpipe. Made of cast brass, swivel handle with red marlin trim. Discharge end supplied with underwriters thread (2 3/16" ODM x 12 threads
per inch). Inlet 2 1/2" NST threads with a standard discharge tip of 1 1/8". Buy on-line here.
Racks and Rack Covers
Economy Hose Reels shipped assembled. Red baked enamel finish. Comes with a 14
gauge steel wall bracket that swings 180° (will accept 2" to 3" pipe clamps sold separately). Buy on-line here.
Heavy Duty Brooks Hose Reels made in the US. The sides and hub are made of 16
gauge steel. Welded steel 1" x 3/16" reel bracket with a 1 1/2" x 1/4" wall bracket provides superior support. Wall bracket swings 180° and easily adapts to mounting on
pipes (1 1/2" to 3") with optional pipe bracket set and pipe clamps. Comes with reusable velcro back strap to prevent accidental unrolling of hose. Buy on-line here.
Red enameled steel Hump Racks provide for the easy storage of fire hose. Supports
the hose weight at the center, relieving strain on the folded ends and the couplings which will increase its service life. Buy on-line here.
Rack Covers Made of durable red vinyl to protect from dirt and other natural elements.
Helps to prevent tampering, makes rack easier to find, and can be removed quickly. Buy on-line here.
Spanner Wrenches made of cast aluminum that fits hose lugs 1 1/2" thru 3". Buy on-line
here.
Fire Hose Valves and Connections
Gated "Y" Leader Line Siamese
with ball valves built into body so that either lead can be used independently. Rocker lug female swivel inlet 2 1/2" NST, male outlets 1 1/2".
Body painted red with polished chrome trim. NOTE: Not recommended for charged preconnected hose lines. Buy on-line here.
Angle Hose Valve made of cast brass for use with hose storage devices and hydrants.
Has a 300lb. rating and is U.L. Listed and FM Approved. Buy on-line here.
Pressure Reducing Angle Valve made of cast brass can be adjusted to restrict
pressures up to 175lbs. Locking pin device restricts full opening of valve by untrained personnel. Pin may be removed by fire personnel to allow full open valve. U.L. Listed
Gate Valve
made of cast brass for use on standpipes, fire pumps or hydrants. Has a straightway pattern, non rising stem and is rated at 300lbs. U.L. Listed and FM Approved. Buy on-line here.
Single Hydrant Gate Valve
made of cast brass for use on standpipes, fire pumps or hydrants. Has a straightway pattern, non rising stem and is rated at 300lbs. U.L. Listed and FM Approved. Buy on-line here.
For Swift sales call 706-283-8459
|
